How to Hack Wifi Password With Rooted Android

safi6382 946 Days ago

Hack WiFi on Android
1.Not every Android phone or tablet will
be able to
crack a WPS PIN. The device must have
Broadcom bcm4329 or bcm4330
wireless chipset,
and must be rooted. The Cyanogen
ROM will
provide the best chance of success.
2.Download and install bcmon. This
tool enables
Monitor Mode on your Broadcom
chipset, which is
essential for being able to crack the
PIN. The
bcmon APK file is available for free
from the bcmon
page on the Google Code website.
3.Run bcmon. After installing the APK
file, run the
app. If prompted, install the firmware
and tools.
Tap the "Enable Monitor Mode" option.
If the app
crashes, open it and try again. If it fails
for a third
time, your device is most likely not
Your device must be rooted in order to
run bcmon.
4.Tap "Run bcmon terminal". This will
launch a
terminal similar to most Linux
airodump-ng and tap the Enter button.
will load, and you will be taken to the
prompt again. Type airodump-ng wlan0
and tap
the Enter button.
5.Identify the access point you want to
crack. You
will see a list of available access
points. You must
select am access point that is using
6.Note the MAC address that appears.
This is the
MAC address for the router. Make sure
that you
have the right one if there are multiple
listed. Jot this MAC address down.
Also note the Channel that the access
point is
broadcasting on.
7.Start scanning the channel. You will
need to
collect information from the access
point for
several hours before you can attempt to
crack the
password. Type airodump-ng -c
channel# --bssid
MAC address -w output ath0 and tap
Airodump will begin scanning. You can
leave the
device for a while as it scans for
information. Be
sure to plug it in if you are running low
on battery.
Replace channel# with the channel
number the
access point is broadcasting on (e.g.
Replace MAC address with the MAC
address of the router (e.g
Keep scanning until you reach at least
20,000-30,000 packets.
8.Crack the password. Once you have a
number of packets, you can start
attempting to
crack the password . Return to the
terminal and
type aircrack-ng output*.cap and tap
9.Note the hexadecimal password when
After the cracking process is complete
(which could
take several hours), the message Key
Found! will
appear, followed by the key in
hexadecimal form.
Make sure that "Probability" is 100% or
the key will
not work.[1]
When you enter the key, enter it
without the ":". For
example, if the key was
12:34:56:78:90, you would
enter 1234567890.
Note:Try at your own risk...

Gift 324 Days ago

GIFT says: Nice post 116

Gift 324 Days ago

GIFT says: Nice post 116

shohag 53 Days ago

good job

safi6382 30 Days ago



Post Text:

You must Login first to make comment
Share on:
Report Copyright & DMCA:
If this content is violation of your copyright, please Report a violation. we will remove it within 24 hours.